General Laborer

This role focuses on supporting the production of large precast concrete forms used in structures such as parking garages, grocery stores, and apartment buildings. You will help build and prepare steel and wooden molds based on blueprints, assist with concrete placement and finishing, and perform general labor tasks that keep the plant operating efficiently. Once the concrete forms are manufactured and shipped to construction sites, the production work is complete on-site.

• Build and assemble steel and wooden frames (molds) for precast concrete based on blueprints and piece drawings.
• Use hand tools and power tools to assist carpenters in constructing wooden frames and installing steel components within the forms prior to concrete pouring.
• Handle and move materials such as mesh sheets (including two-person lifts of up to 100 pounds), rebar, wires, nuts, and bolts to designated stations for form building.
• Prepare molds and beds for concrete placement by cleaning, scraping, and setting up side forms, chamfers, and bottom steel or plates according to specifications.
• Set up equipment used for casting bands and finishes to meet required design and quality standards.
• Lay out beds with proper dimensions for each piece drawing and for the overall bed length, ensuring accurate measurements and alignment.
• Monitor bed heat using computer systems to support proper curing conditions and product quality.
• Coordinate and assist with the pouring of concrete into molds within the plant, ensuring proper placement on the bed to match piece drawings.
• Smooth and finish concrete surfaces using brooms, levels, screeds, and laser screeds to achieve the required finish and tolerances.
• Wash exposed aggregate on panels and full beds to meet finishing specifications.
• Perform grinding tasks, including grinding ends of panels and cleaning pallets and beds to prepare for subsequent production.
• Scrape and clean side forms and chamfers, and apply oil to forms as needed to ensure proper release and surface quality.
• Ensure correct dunnage placement for finished products in the yard to support safe storage and transport.
• Carry out general labor duties such as sweeping, cleaning wooden forms to prep for the next pour, and assisting with plant start-up and ongoing production activities.
• Follow all safety procedures, including safe lifting, tool use, and material handling practices throughout the workday.
• Work collaboratively with production teams to meet daily output goals and maintain a clean, organized work area.

• Demonstrated mechanical aptitude with experience using power tools and hand tools in a labor or construction setting.
• Prior labor experience in physically demanding environments, such as construction, manufacturing, or general labor.
• Ability to accurately read and use a tape measure for layout, cutting, and verification of dimensions.
• Capability to lift and move heavy materials, including assisting with two-person lifts of items up to approximately 100 pounds.
• Comfort working from blueprints and piece drawings to follow instructions for mold setup and concrete placement.
• Willingness and ability to work flexible hours, understanding that daily end times can vary based on production needs.
• Reliable transportation to and from the worksite to meet scheduled shifts.
• Ability to follow safety guidelines and use personal protective equipment as required.
• Capacity to work in a fast-paced, industrial environment that involves dust, dirt, and exposure to outdoor-like temperatures.

• Professional construction experience in areas such as carpentry, concrete work, demolition, or framing is preferred.
• Experience in precast concrete production or concrete finishing is an advantage.
• Ability to read and interpret blueprints with confidence is highly desirable.
• Familiarity with general labor tasks in a plant or manufacturing environment.
• Strong attention to detail when measuring, laying out beds, and setting up forms.
• Comfort using equipment such as screeds and laser screeds for concrete finishing.
• Willingness to learn specialized precast processes, including exposed aggregate washing and dunnage placement.
• Dependable work habits, including punctuality and consistent attendance.

You join a production team that plays a key role in creating structural components used in major commercial and residential projects. The work offers consistent full-time hours with opportunities for overtime, allowing you to build your skills in concrete, carpentry, and general construction within a hands-on environment. You gain exposure to specialized precast processes and equipment, which can support long-term growth in the construction and manufacturing industries. The culture values reliability, teamwork, and a strong work ethic, giving you the chance to contribute directly to visible, large-scale projects.

This position is based in an industrial precast concrete plant where large concrete forms are manufactured and prepared for shipment to construction sites. The environment is physically demanding, with frequent standing, bending, lifting, and moving of materials such as mesh, rebar, and tools throughout the shift. The facility does not have climate control, so it can be very cold in the winter and hot in the summer, and the work area can be dusty and dirty due to ongoing concrete and construction activities. Typical hours fall between approximately 5–7 AM and 3–5 PM, Monday through Friday, with occasional Saturdays as production requires, averaging about 40–46 hours per week. You work with hand tools, power tools, concrete finishing tools, and equipment such as laser screeds, following safety protocols and wearing appropriate work attire and protective gear suitable for a rugged, industrial setting.

This is a Contract to Hire position based out of Trenton, MI.

The pay range for this position is $20.00 - $20.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Trenton,MI.

This position is anticipated to close on Aug 28, 2026.

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.