AP2 Pickling Operator

GENERAL JOB DESCRIPTION:This position of AP2 Pickling operator is responsible for all operating functions as listed below. Operation of the AP1 Unit must be understood in total with the focus of utilizing the equipment to meet all the quality and productivity goals as outlined in our quality system. All work instructions must be followed as outlined.ESSENTIAL JOB FUNCTIONS:1.) Check schedule of coils to be run to insure correct coil is on the line. 2.) Receive communication from entry of coil number running and observe for any defects and correct as necessary. 3.) Insure entire pickling section is per work instructions. 4.) Monitor coils in line for steering and defects, correct as necessary. 5.) Insure Shot Blaster is operating as per work instructions. 6.) Insure all pickling parameters are per work instructions and meet quality standards. 7.) Start the coil to the Coiler Reel and insert Interleaving Paper as per work instructions. 8.) Take acid samples every three hours and make additions per work instructions. 9.) Contact Waste Water Treatment Plant Operator as necessary. 10.) Properly identify coils exiting the unit as per work instructions. 11.) Follow all prescribed safety rules. 12.) Housekeeping/maintenance work as assigned. 13.) Any other jobs as assigned.SUPPLEMENTAL JOB FUNCTIONS:1. Other duties as assigned2. Participation in relevant continuous improvement programs.MINIMUM EDUCATION, SKILLS AND EXPERIENCE:Minimum of High School Degree or Equivalent (GED).PHYSICAL ABILITIES REQUIRED:• Mobility in plant• While performing the duties of (this job), the employee is regularly required to sit, stand, walk, etc.• The employee is frequently required to make use of their hands for technical tasks• The employee must occasionally lift and/or move up to 50 pounds• Visual ability with or without correction• Communication abilities HEALTH AND SAFETY:1. Work in compliance with the Occupational Health and Safety Act and regulations2. Follow Company safety rules3. Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately4. Use or wear the equipment, protective devices or clothing that is required to be used or worn:a. Safety shoesb. Safety glassesc. Hearing protectiond. Hard HatSome areas may require additional personal protective equipment such as:e. Respirators; the respirator requires you to be clean shaven in order to comply with company policies and procedures as well as OSHA Regulations.f.Fire Retardant clothingg. Acid PPE5. Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy6. Must follow all Lock out Tag out (LOTO) guidelines for designated machines7. Must follow all Environmental Policies and Regulations8. Maintain a clean and safe work area.WORK ENVIRONMENT:1. Work in compliance with the Occupational Health and Safety Act and regulations2. Clean, well ventilated and safe work areas.HUMAN RESOURCES:1. Abiding by the Acerinox Code of Conduct2. Keeping oneself informed through your company email account3. Maintaining your Dynamic Policy Profile and all assigned learnings therein 4. Abiding by all security procedures5. Must have strong written and verbal communication skills6. Must be able to learn, adapt, and retain information7. Must have strong attention to detail and problem-solving skills